PACCON 2017 Green Convergence on Chemical Frontiers
February 2-3, 2017 Centra Government Complex Hotel & Convention Centre



Check Code for Poster Presentation


Session Abstract Title
Analytical Chemistry (AN)
AN-P-001 Development and validation of a stability indicating HPLC method for determination of doxycycline hyclate in bulk and capsules
AN-P-002 Development of hydrodynamic sequential injection system for online liquid-liquid extraction using mobile phone as the detector
AN-P-003 The application of the mobile phone as the detector for flow-based titrimetric analysis
AN-P-004 Validation for rapid analysis of oil palm bunch by microwave heating combined with multistage solvent extraction under magnetic stirring
AN-P-005 Determination of Ochratoxin A in cereals by LC-MS/MS with QuEChERS extraction
AN-P-006 Paper-based fluorescence assays of CYP450 activities using portable microscope
AN-P-007 Determination of acetone by a colorimetric method based on gold nanoparticles
AN-P-008 Analysis of volatile odor compounds in dark roasted Arabica coffee beans from Chiang Rai by using solid phase microextraction- gas chromatography-mass spectrometry
AN-P-009 A turbidimetric sequential injection system for the analysis of sodium chloride in fish sauces
AN-P-010 An application of H2O2 biosensor with anti-AFP for tumor marker immunosensor
AN-P-011 The wicking study of food color based on electrophoresis cotton-based device
AN-P-012 Method development for determination of carbofuran using graphene oxide and gold nanoparticles modified on screen-printed carbon electrode
AN-P-013 Determination of creatinine in urine samples using microfluidic paper-based analytical devices
AN-P-014 Ferroin photometry by smart phone camera and application
AN-P-015 A simple colorimetric method for the determination of total capsaicin in chili collected in Nakhon Ratchasima Province
AN-P-016 Simple-colorimetric method for determination of total flavonoids in Miang, a traditional fermented tea leaf (Camellia sinensis var. assamica)
AN-P-017 Determination of residue carbofuran in water, food grains and vegetables by spectrophotometry for the development of simple screening carbofuran test kit
AN-P-018 The modification of screen printed electrode with Cu-MnO as arsenic sensor
AN-P-019 Determination of rare earth elements in the decomposition process of Thai monazite ore samples by wavelength dispersive X-ray fluorescence
AN-P-020 Rare earth elements and thorium analysis of geological samples by inductively coupled plasma optical emission spectrometry
AN-P-021 Volatile compounds of Khiaosawoey mango twigs by gas chromatography mass spectrometry
AN-P-022 Development of electrochemical sensor using bismuth deposited gold nanowire modified carbon nanotube on screen printed electrode for determination of arsenic (III)
AN-P-023 Chronoamperometric biosensor for cholesterol based on nickel hexacyanoferrate nanoparticles-gold nanowires -carbon nanotube-chitosan scaffolds modified on screen printed carbon electrode
AN-P-024 Microfluidic paper-based devices (?PADs) for determination of ascorbic acid in tropical fruits in Thailand
AN-P-025 A simple and rapid on-line spectrophotometric determination of copper
AN-P-026 Enantiomeric separation of 1-phenylethanols by gas chromatography using acetylated gammacyclodextrin as stationary phase
AN-P-027 Determination of silver by dispersive liquid-liquid microextraction (DLLME) preconcentration and UV-visible spectrophotometric detection
AN-P-028 Determination of cadmium in water samples by dispersive liquid-liquid microextraction combined with UVvisible spectrophotometry
AN-P-029 Bacterial sensing by adsorptive stripping cyclic voltammetry
AN-P-030 Colorimetric detection of cysteine using silverhydroxyapatite nanoparticles
AN-P-031 Development of urinary albumin and creatinine detection kit
AN-P-032 A new solid phase extraction sorbent for the extraction of aflatoxins from corn samples
AN-P-033 A magnetic adsorbent of octadecyl/silica/magnetite nanoparticles for the extraction of tetracyclines from water samples
AN-P-034 Method development for the determination of alkanolamines using high performance liquid chromatography
AN-P-035 An electrochemical sensor for the determination of artemisinin based on screen-printed carbon electrode
AN-P-036 Fast electrophoresis chip analysis of ciprofloxacin and enrofloxacin in pharmaceutical formulations
AN-P-037 Development of an electrochemical sensor for the determination of carbofuran in vegetable samples
AN-P-038 Development of chemiluminescence system for determination of total antioxidant content in beverages
AN-P-039 Chemical sensor based on the fluorescence quenching of CdTe quantum dots for the determination of lead ions
AN-P-040 A fluorescence probe based on molecularly imprinted polymer coated on CdTe quantum dots for a selective determination of amoxicillin
AN-P-041 A novel colorimetric method for determination of formaldehyde using gold nanoparticles modified with 4-aminophenyl sulfone on paper based devices
AN-P-042 Paper-based analytical device for colorimetric determination of oxalate
AN-P-043 Development of flow injection analysis system with colorimetric detector for dual antioxidant assays
AN-P-044 Validated determination of hyaluronic acid by UPLC-UV for pharmaceutical products
AN-P-045 A spectrophotometric determination of the pesticide o-phenylphenol at the ppb level
AN-P-046 Electrospun polyacrylonitrile nanofibers as fiber coating in solid phase microextraction
AN-P-047 Spectrophotometric determination of Zn2+ with a synthetic Schiff base of 4-chloro-2-(quinolone-8-yliminometyl)
AN-P-048 Application of a synthetic Schiff base of 4-bromo-2-(quinolone-8-yliminomethyl)-phenol in ethanol for the determination of Zn (II) by spectrophotometric method
AN-P-049 Method development for quantitative analysis of uric acid in urine using an in-house LED spectrometer
AN-P-050 Single drop analysis of hydroquinone using screenprinted graphene electrode
AN-P-051 Analysis of volatile compounds in fermented soybeans prepared by Bacillus subtilis and Rhizopus oligosporus
AN-P-052 Factors influencing the formation of sediment from seasoning soy sauce
AN-P-053 The development of cholesterol biosensor based on cholesterol oxidase implanted in the matrix of scaffolds film modified on screen printed carbon electrode
AN-P-054 Application of vortex assisted dispersive liquid-liquid microextraction followed by gas chromatography-flame ionization detection for acrylamide determination in fried fruits
AN-P-056 Vortex and surfactant assisted low density solvent liquidliquid microextraction for liquid chromatographic determination of polycyclic aromatic hydrocarbons
AN-P-057 A potentiometric microtitration method for the determination of ethanol residue in biodiesel samples
AN-P-058 Spot test on paper for quantitative determination of chloride in tap water
AN-P-059 A colorimetric paper-based glucose analysis test kit with detection by camera cell phone
AN-P-060 Design and invent explosives detection system based on smartphone
AN-P-061 Microfluidic system incorporating to optical sensor for determination of acetaminophen
AN-P-062 Fluorescence derivative as a fluorescence sensor for cyanide detection in aqueous samples
AN-P-063 A colorimetric analysis for determination of sodium ion in urine samples
AN-P-064 Chemical analysis of major constituents from Ban Dung rock salt
AN-P-065 Utilization of orchid extract for determination of copper (II) ion using flow injection analysis system
AN-P-066 Capillary electrophoresis method for determination of three nonsteroidal anti-inflammatory drugs in pharmaceutical formulation
AN-P-067 Analysis of benzoic acid in curry paste samples by ultrasonic extraction and high performance liquid chromatography
AN-P-068 Continuous flow analysis of ammonia using gas diffusion and polypyrrole-modified electrode
AN-P-069 Quantitative analysis of 4,7-dimethoxy-5-methyl-1,3-benzodioxole in Antrodia camphorata extracts by TLC-densitometric method
AN-P-070 Synthesis polypyrrole doped with hydroquinone monosulfonate as a pH sensor for flow injection potentiometric titration
AN-P-071 Electrochemical impedance spectroscopy study of electrodeposited TiO2 thin films
AN-P-072 Simultaneous determination of nitrate and nitrite using membraneless gas-separation microfluidic paper-based analytical device
AN-P-073 An economical test kit for determination of orthophosphate in wastewater
AN-P-074 A low-cost iron (II) test kit for wastewater analysis using smartphone color capture application
Environmental Chemistry (EN)
EN-P-001 Using Eichhornia crassipes to adsorb Eriochrome Black T: Equilibrium and thermodynamic
EN-P-002 Development of magnetic rubber beads for oil and gasoline sorbents
EN-P-003 Adsorption isotherm and kinetics of nonylphenol by chemically modified fish scales of Rastrelliger neglectus as low- cost adsorbents
EN-P-004 Kinetics and mechanism of using chitosan and silica as adsorbents for removal aqueous humic acid
EN-P-005 Equilibrium, kinetics and mechanism of adsorption basic red 2 dye onto modified chitosan with commercial detergent solution as adsorbent
EN-P-006 Adsorption of Congo red onto modified rice husk from aqueous solution
EN-P-007 Fluorescence sensor array for rapid detection of heavy metal ions
EN-P-008 Effect of parameters on simultaneous H2 production and biodiesel wastewater remediation by photocatalytic oxidation via TiO2 (P25)
EN-P-009 Characterization of copper(II) at nanochitosan -schiff base modified electrode
EN-P-010 Volatile organic compounds of charcoal combustion smoke
EN-P-011 Effects of cellulase enzyme and nonionic surfactant on deinking of xerographic and laser-printed paper
EN-P-012 Deinking of noncontact-printed office waste paper with hemicellulase enzyme along with Tween-80 surfactant
EN-P-013 Eco-dyeing using banana sap as a natural mordant for natural dye
EN-P-014 Using the dye extracted from Gardenia carinata Wall for the coloring of cotton yarn, by comparison, the binding of dye with chemical and natural mordants
EN-P-015 Effect of distribution of the electric charge density in the viscoelastic fluid towards the micro-channel flow in membrane context
EN-P-016 Effect of production parameters on the kinetic viscosity and others fuel properties of biodiesel prepared from waste cooking oil
EN-P-017 Removal of inorganic arsenic species in seaweed Gracilaria fisheri by using typical edible eluents
EN-P-018 Removal of reactive dyes (Yellow 145, Red 195 and Blue 222) by chitosan extracted from Esanthelphusaspp. Sayamiaspp. and activated carbon prepared from Mimosa pigra L. coated with chitosan
EN-P-019 Cellulose based composite as membrane for chromium (III) removal
EN-P-020 Removal glycerides from rice bran acid oil by hydrolysis with subcritical water
EN-P-021 The preparation of modified chitosan beads and their efficiency in heavy-metal ion removal
EN-P-022 Consecutive removal of basic dye and reactive dye using biological sludge from wastewater treatment process
EN-P-023 Iron removal from synthetic aqueous solution using amino functionalized commercial silica gel as adsorbent
EN-P-024 Removal of 17 alpha-methyltestosterone in synthetic wastewater with UVC and Salvinia based reactor
EN-P-025 Preparation of commercial TiO2 coated on activated carbon for decolorization of methylene blue
EN-P-026 Study on water quality in extensive shrimp farming at Bangkhuntein District, Bangko
EN-P-027 Heavy metal removal from wastewater by chemical precipitation
EN-P-028 Rapid removal of pharmaceuticals from water by surfactin-enhanced coagulation-flotation method using sodium dodecyl sulfate
EN-P-029 Humic substance extraction from leonardite, lignite Mae Mho Mine by base-acid treatment process
EN-P-030 Contamination and distribution of nitrate in the groundwater system of limestone aquifers in SaraburiLopburi Karst area, central Thailand
EN-P-031 Using stable isotopes to identify water sources for rice paddy field in Suphanburi, Thailand
EN-P-032 Isotopic signatures in meteoric waters of Bangkok, Thailand
EN-P-033 Hemp stem-derived activated carbon for tar and nicotine adsorption in cigarette filter
EN-P-034 Simulation of product formation from ozonolysis of monounsaturated omega-9 fatty acid
EN-P-035 A study of photocatalytic activity for F-TiO2/AC on dye wastewater in a dynamic reactor
EN-P-036 Gamma spectroscopic analysis and associated radiation hazards of building material used in Vientiane capital, Lao PDR
Sustainable Food and Agricultural Chemistry (FA)
FA-P-001 The optimum conditions for extraction of fatty acids from Mon Thong durian seed kernel and analysis by gas chromatography-flame ionization detector
FA-P-002 Arsenic, cadmium and lead contents in polished rice samples
FA-P-003 Content of copper, lead and cadmium in some local vegetable samples from the South of Thailand
FA-P-004 Proximate analysis and chemical composition of alternative dog snack supplemented with Saccharomyces cerevisiae and Mao berry pomace
FA-P-005 Colorimetric method for determination of ethanol in gas phase
FA-P-006 Developing In-House electronic nose for adulteration detection of Jasmine rice
FA-P-007 Perchlorate analysis of vegetables grown in northern Thailand
FA-P-008 Effect of freezing temperature and sucrose on pore size of microfibril cellulose
FA-P-009 Preliminary design of automatically antioxidant capacity analyzer based on ABTS assay
FA-P-010 Development of a gas diffusion unit incorporating to flow injection analysis for determination of total cyanide in plant extract
FA-P-011 Chemical constituents and antioxidant activity of Camellia sinensis var. assamica
FA-P-012 Effect of hydrocolloids on physicochemical properties of Thai northern style sausages
FA-P-013 Stability of blended oil between fish oil from Barbodes altus and coconut oil with extracted ginger
FA-P-014 Effect of packaging material on inhibitory migration of trimethylamine of dried squid
FA-P-015 Partially purified insulin production from Tuna pancreas from canning processing plant waste
FA-P-016 Total phenolic content and antioxidant activity of coconut oil with some extracted curcuma species in Thailand
FA-P-017 Chemical properties of blended oil containing coconut oil and sacha inchi oil or peanut oil by cold extraction
FA-P-018 Effect of drying temperatures on antioxidant and antimicrobial activity of coffee pulp extract
FA-P-019 Effect of packaging on quality of boiled mackerel
FA-P-020 Hydrolysis of capsaicin using immobilized enzymes
FA-P-021 Application of crude proteolytic enzyme extract from fresh rhizome ginger to produce coconut oil
FA-P-022 Antimicrobial effect and application of exopolysaccharide film from Aureobasidium pullulans YTP6-14 with cinnamaldehyde
FA-P-023 Fermentative Production of mevalonate by a microorganism
FA-P-024 Total phenol and flavanoid contents, antioxidant, and antibacterial activities of Delonix regia and Swietenia mahogany
FA-P-025 Antioxidant activity and quantitative analysis of Thiamine from some types of rice for its application as nourishing skin cream
FA-P-026 Application of natural color from mango leaf in natural rubber
FA-P-027 Effect of degummed procedure on crude palm oil properties and biodiesel product
FA-P-028 Effect of rain-fed and surface drip irrigation by efficiency of fertilizers and rice husk ash using cassava Var HB 80 in late and early rainy seasons
FA-P-029 Content of amylose, amylopectin, vitamin B (B1 and B2), iron and phosphorus in various corn varieties in Loei Province
FA-P-030 Determination of heavy metals in lotus tea products
FA-P-031 Stability and fatty acid composition of blends oil between peanut oil and coconut oil from cold extraction method
Industrial Chemistry and Innovations (IC)
IC-O-001 Water-Dispersible Carbons for Ordinary Portland Cement
IC-O-005 The fabrication of vietnamosasa pusilla fiber reinforced thermoplastic for green composite applications
IC-P-001 Development of refractory-porous granular for thermal insulating material on ceramic kiln
IC-P-002 The comparison of firing temperature on physicals properties of crystalline glaze for stone ware body
IC-P-003 Development of the additional agriculture byproducts for increasing clay-body porosity in the making of ceramic water filters
IC-P-004 Effect of firing condition of reduction atmosphere on physicals properties of copper red glaze for automatic kiln
IC-P-005 Synthesis the combination of gold nanoparticles-kojic acid for antimelanin activity
IC-P-006 Bimetallic NiCu/HZSM-5 Catalyst in hydroprocessing of palm fatty acid distillate for green fuel production
IC-P-007 Design of carotenoids extraction process from crude palm oil using green solvent
IC-P-008 Selection of suitable feedstocks for dimethyl ether production based on CO2 utilization
IC-P-009 Effect of mixer types on biodiesel production
IC-P-010 Use of metal mesh to increase absorption efficiency of volatile organic compound in microchannel
IC-P-011 Colorant removal process for polypropylene waste
IC-P-012 Improvement of hydrocarbons detector process for steam condensate from heat exchanger in an Aromatics Production Units
IC-P-013 CFD simulation of flow behavior in an immiscible liquid stirred tank: effect of turbulence and drag models
IC-P-014 Simulation of pressure retarded osmosis (PRO) process for power generation
IC-P-015 Process simulation of sodium methoxide production from methanol and sodium hydroxide using reactive distillation
IC-P-016 Simulation of biodiesel production from PFAD using a reactive distillation
IC-P-017 Influence of bubble size on hydrodynamic in a gas-liquid-solid three phase fluidized bed reactor
IC-P-018 Preparation of water-soluble, blocked diisocyanates and their use in waterborne adhesive application
Inorganic Chemistry (IN)
IN-P-001 Colorimetric and fluorimetric sensors for cyanide ion detection from 3,6-disubstituted carbazole derivatives
IN-P-002 Synthesis and photophysical characterization of series of aminoalkyl tris-cyclometalated iridium complexes
IN-P-003 Tunable acid-functionalized metal-organic frameworks for biomass conversion
IN-P-004 Influence of metals towards CO2 separation and storage properties of metal-organic framework (MOFs)
IN-P-005 Synthesis and characterization of novel [Fe(qsal-X)2]OTs complexes
IN-P-006 Dissymmetric bis(dipyrrinato)zinc(II) complexes:Rich variety and bright red to near-infrared luminescence with a large pseudo-stokes shift
IN-P-007 Improved synthesis method of SiO2@Ag core-shell for detection of toxic metals in water
IN-P-008 Development of copper(I) and iron(II) N-heterocyclic carbene complexes catalyzed the synthesis of nbutanol from ethanol
IN-P-009 Synthesis of high-quality mineral water for potential skincare products
IN-P-010 Novel 1D and 2D transition metal (Zn, Mn and Cd) coordination polymers constructed by dicyanoargentate(I) and 1-benzyimidazole ligand: Synthesis, characterizations and photoluminescent properties
IN-P-011 Synthesis and characterization of graphene-TiO2 composites from graphite intercalation compounds
IN-P-012 MnOx supported on hydrotalcite as catalysts for aerobic N-alkylation reaction of benzenesulfonamide with benzyl alcohol
IN-P-013 Synthesis, spectroscopic characterizations and X-ray structural studies of new one-dimensional Zn(II) and Co(II) coordination polymers containing 2-hydroxybenzoato and 4,4?-bipyridine ligands
IN-P-014 Gas sensor for alcoholic volatile organic compounds based on silver porphyrin molecular film
IN-P-015 Synthesis and Photoluminescence properties of Lanthanide benzene-1,4-dicarboxylate-oxalate frameworks
IN-P-016 Two-dimensional Zn(II) metal-organic framework containing pyridine-2,6-dicarboxylato bridging ligand: Synthesis, characterization, crystal structure, photoluminescent and catalytic properties
IN-P-017 Synthesis, spectroscopic characterization and antimicrobial activities of mononuclear transition metal complexes containing benzoate and bipyridine chelating derivatives
IN-P-018 Syntheses, characterization and Hirshfeld surface analyses mononuclear and dinuclear copper(I) complexes
IN-P-019 Electrochemical performance of protocatechuic acid ethyl ester as a new transition metal-selective ionophore in modified PVC-based membrane sensor
IN-P-020 Two isomorphous 3D anionic lanthanide metalorganic framework with a 66 dimondoid topology
IN-P-021 New EDTA-Based drug delivery carrier
IN-P-022 The synthesis and characterization of novel Tetrakis(4 butyloxyphenyl) phenylporphyrinato-copper(II) (CuTOBPP) complex and it's thermal stability
IN-P-023 A new series of b-nitro substituted copper(II) porphyrin complexes and the alcohol sensing application
IN-P-024 Utilization of mixed ligands for construction of 3D lanthanide coordination polymers: Temperature-dependent structure, topology, and photoluminescent propertie
IN-P-025 Nickel(II) complexes containing dibenzonylmethanate and imidazole ligands; Synthesis, structure and antibacterial activity
IN-P-026 Zinc oxide nanoparticles synthesis by arc discharge on zinc solution
IN-P-027 Synthesis, crystal structures of nickel (II) and cobalt (II) complexes based on benzoylacetonate and imidazole ligands and antibacterial activity
IN-P-028 A two-fold interpenetrated 3D metal-organic framework with rtl-c topology
IN-P-029 Green synthesis and characterization of silver nanoparticles using Jatropha curcas L. leaf extract and their antibacterial activity
IN-P-030 Novel anionic bimetallic metal-organic framework with new topology
IN-P-031 Aqueous kaffir lime leaves extract - mediated synthesis and characterization of Ag/AgCl nanocomposites
IN-P-032 Rapid synthesis of a new polymorph of Cu-4,4?-Oxybis(benzoate)
IN-P-033 Synthesis and photocatalytic activity of ZnObentonite hybrid
IN-P-034 The optical properties of ZnS and CdS in organically modified layered double hydroxide
IN-P-035 New Zn(II) and Cd(II)-metal organic frameworks : Synthesis, structures and optical properties
IN-P-036 Origins of the low field signals in the EPR spectra of kaolin minerals
IN-P-037 Magnetic BiFeO3/Bi2O3 photocatalyst for dye degradation under visible light
Materials Science and Nanotechnology (MS)
MS-P-001 Synthesis and characterization of Titanium dioxide from Ilmenite waste
MS-P-002 XANES studies on the oxidation states of copper Ion in silicate glass
MS-P-003 Synthesis, characterization of AlxZn1-xO and its application for photocatalytic hydrogen production from water splitting
MS-P-004 Synthesis and characterization of CeO2/SCB multifunctional porous materials with enhanced photocatalytic activity
MS-P-005 Enhanced photocatalytic activity by silver-modified bismuth vanadate
MS-P-006 Dispersion of organically modified montmorillonites in organic media
MS-P-007 Adsorption of indium (III) onto layered silicates
MS-P-008 Solid-state syntheses of layered titanates at lower temperature toward improved materials performances
MS-P-009 Synthesis of hydroxyapatite using lime mud by mechanochemical method
MS-P-010 Application of dry grass for clay brick manufacturing
MS-P-011 Characterization of Ag or Zn doped apatite coating on Ti substrate by sol-gel method
MS-P-012 Influence of bismuth oxide on properties of nickel manganite ceramics
MS-P-013 The effect of rubber on mechanical, thermal and morphological properties of natural rubber/polyethylene/epoxidized natural rubber blends
MS-P-014 The preparation and characterization CuNi catalysts supported on treated carbon for PEMFC
MS-P-015 Synthesis, characterization and optical properties of metal-modified ZnO hexagonal plate
MS-P-016 Hybrid white organic light emitting diodes from fluorescent blue emitter and phosphorescent charged iridium(III) complexes
MS-P-017 Natural dye-sensitized metal oxide photocatalyst and theirs photocatalytic prop
MS-P-018 Enhanced photocatalytic activity by Brazilinmodified metal oxide photocatalyst
MS-P-019 Novel charged iridium complexes for organic light emitting diodes (OLEDs)
MS-P-020 Pure and co-emitter by charged iridium(III) complexes in LECs device
MS-P-021 The effect of Pt precursor on the catalytic properties of Pt/TiO2 catalysts in the selective hydrogenation of 3-nitrostyrene
MS-P-022 Dimerization of isobutene to isooctene over NiOW2O3/Al2O3 catalysts
MS-P-023 Effect of transition metal promoted on vanadium phosphorus oxide (VPO) catalysts in the partial oxidation of n-Pentane
MS-P-024 Manganese doped zinc oxide photocatalyst and theirs prope
MS-P-025 Synthesis zeolite X from kaolin by hydrothermal for upgrading biodiesel
MS-P-026 Investigation of CO2, N2, O2, CH4, pure and in air on zeolitic imidazolate framework-78: molecular simulations
MS-P-027 Synthesis and photophysical study of multifluorinated charged iridium complexes
MS-P-028 An enhanced photocatalytic activity of methylene blue using visible light responsive V-doped TiO2 nanoparticles
MS-P-029 Anticorrosion of cold rolled steel using polyaniline composite with TiO2
MS-P-030 Synthesis of magnetically recoverable rod like Bi2O3/?-Fe2O3 composite with high photocatalytic performance under visible light irradiation
MS-P-031 Green synthesis of titanium dioxide from Siamese neem (Azadirachta indica A. Juss. Var Siamensis Valeton) leave extract
MS-P-032 Preparation of TiO2-SiO2 using bamboo as silica source and its application for batiks wastewater treatment
MS-P-033 Preparation of TiO2-Bamboo Leaves Ash Composite as Photocatalyst for Dye Waste water Treatment
MS-P-034 New method for determination of microbial diffusion from nanofiber membrane
MS-P-035 Development of nano-radiopharmaceutical model using AuNPs conjugated DOTANOC peptide to enhance uptake the somatostatin receptors
MS-P-036 Release of Thiram Fungicide from electrospun cellulose acetate fiber mats
MS-P-037 Curcumin nanosuspension: Screening for antioxidant and antibacterial activities and study of protein adsorption
MS-P-038 Design of experiment approach for fabrication process of electrospun shellac nanofibers using factorial designs
MS-P-039 Intracellular trafficking of different shaped oxidized carbon nanoparticles
MS-P-040 Photocatalytic activity of sol-gel synthesized-TiO2 to remove organic compounds
MS-P-041 Nitrogen-enriched activated carbon from crustacean shells
MS-P-042 Simple formulation of organo-soluble reduced graphene oxide/polymer assembly through noncovalent approach
MS-P-043 Simple preparation of strongly fluorescent carbon quantum dots through microwave-assisted pyrolysis of amidation monomers
MS-P-044 A plasmonic colorimetric mercury (II) sensor based on silver triangular nanoplates
MS-P-045 Rod-like template induced by a mixed surfactant system in montmorillonite
MS-P-046 Effect of precursor structure on unibody core-shell properties and the study of a duel anti-drug drug releasing system
MS-P-047 Synthesis of new boronic acid functionalized graphene quantum dots (BGQDs) for H2O2 detection
MS-P-048 A simple and efficient one-pot synthesis of Zn nanoparticles
MS-P-049 Effect of cetyltrimethylammonium bromide and heptane on the synthesis of zeolite X and its CO2 adsorption properties
MS-P-050 Investigation of the influences of reaction temperature and time on the chemical reduction of graphene oxide by conventional method using vitamin C as a reducing agent
MS-P-051 Preparation of magnetic zinc ferrite nanoparticles and their photocatalytic performance
MS-P-052 Carbon dots from kappa-carrageenan: photoluminescent properties and its biocompatible environmental applications
MS-P-053 Fabrication and nanostructure study of hydroxyapatite bioceramic from cockle shells
MS-P-054 Preparation of water-dispersible ZnSe/ZnS core-shell quantum dots and investigation of their cytotoxicity
MS-P-055 Adsorption of a cationic porphine into mesoporous silicas structure
MS-P-056 Preparation of mesoporous silicas using Dioleyldimethylammonium salt as structure directing agent
MS-P-057 Copper nanoparticles encapsulated in silica microparticles as antimicrobial additives in cement
MS-P-058 Effect of cooling rate on quality of graphene films grown by atmospheric pressure chemical vapor deposition with acetylene on copper foils
MS-P-059 Green synthesis of silver nanoparticles using Barringtonia acutangula (L.) Gaertn leaf extract as reducing agent and their performance for antibacterial and antioxidant activity
MS-P-060 Green synthesis of silver nanoparticles using biopolymers as an antimicrobial agent for rayon fabrics
MS-P-061 Synthesis of Cu(I,II)O/ZnO/RGO nanocomposites and photocatalytic potentials
MS-P-062 Effect of vetiver fiber reinforce and carbon nanotube on mechanical properties of natural rubber composites
MS-P-063 Characterization of electrospun Ag/Al2O3 fibers for selective catalytic oxidation
MS-P-064 The effect of cationic surfactant on porous structure in electrospun silica nanofibers
MS-P-065 Structural and magnetic properties of Ni0.5Zn0.5Fe2O4 ferrite nanoparticles synthesized by co-precipitation method
MS-P-066 Mechanical properties of nanomaterial-carbon-based coating on cotton thread
MS-P-067 Synthesis of graphene oxide doped silica/polyaniline nanocomposites
MS-P-068 Synthesis of carbon quantum dots (CQDs) from Coffea liberica (Coffee) husk for marking water pathways in plants
MS-P-069 Eco-friendly production of one-dimensional carbon nanomaterials over calcium carbonate via acetylene carbon dioxide reaction
MS-P-070 Synthesis of nano-sized hydroxyapatite from lime mud using chemical precipitation technique
MS-P-071 Biodiesel production from one-pot process combining transesterification and partial-hydrogenation of jatropha oil using metal/CaO nanocatalysts
MS-P-072 Reduced graphene oxide-coated cotton fabric-based flexible electrode for electrocardiography
MS-P-073 Syntheses of monodisperse metal-ferrite nanoparticles and their catalytic activity in oxidative coupling of thiols
MS-P-074 Influence of acidic catalysts in Hydrothermal Carbonization (HTC) process for synthesis of carbon nanomaterial prepared from horse manure
MS-P-075 Effect of sulfuric acid treatment and calcination on commercial zirconia nanopowder
MS-P-076 Hydroxyl scavenging and cytotoxicity of guava leaf extract encapsulated in chitosan nano-carrier
MS-P-077 Preparation of Pt/graphene and Pt-SnO2/graphene composite nanofibers for direct ethanol fuel cell application
MS-P-078 Acetylene adsorption on Sc-, Ti-, V-, and Cr-doped boron nitride nanosheets: A theoretical study
MS-P-079 Utilization of conjugated polymer nanoparticles in chemical sensing application; Study of blended MEHPPV and polystyrene system
MS-P-080 Fabrication of heterostructured nanoplate Cu2-xS@CuInS2 by cation exchange reaction
MS-P-081 Characteristic and preparation of TiO2/PVP nanofiber using electrospinning technique
MS-P-082 Investigation of electrospinning parameters on starch fiber processsability and morphology
MS-P-083 Effect of nano- and micro-sized silica on characteristics of thermoplastic starch
MS-P-084 Investigation of synthesis parameters for tunable size of poly(lactide-co-glycolide) nanoparticle using single emulsion method
MS-P-085 Influence of reaction time on formation of ITO nanoparticles synthesized by hydrothermal method
MS-P-086 Synthesis of AgAuPd nanocatalysts for reduction of 4-nitrophenol
MS-P-087 Effect of prolonged heating on structural transformation from silver nanowires to twisted silver nanowires during the polyol synthesis
MS-P-088 Optimization of carbon nanotube synthesis via methane decomposition over Fe/MgO catalyst
MS-P-089 Preparation and characterization of silver nanoparticles-immobilized halloysite
MS-P-090 Effect of latex rubber and rubber powder on bending strength of cement mortars
MS-P-091 Curcumin encapsulation by chitosan-cyclodextrin polymer
MS-P-092 In-mold labeling (IML) technique on the decoration of plastic processing: A case study on polypropylene compound
MS-P-093 Relationship between color change of poly(vinyl alcohol) films incorporated with butterfly pea extract and quantity of volatile amines from seafood spoilage
MS-P-094 Development of bacterial cellulose and gelatin based composite hydrogel in drug delivery system
MS-P-095 Preparation and characterization of pH-sensitive polymeric particles for control-release of bromothymol blue
MS-P-096 Surface treatment of BaSrTiO3 to enhance the adhesion in BaSrTiO3/Polyurethane composite
MS-P-097 Effect of hard segment content on dielectric properties of polyurethane based polycarbonate diol
MS-P-098 Preparation of microfibril cellulose reinforcement of poly(lacticacid)/poly(ethylene glycol) blend films and theirs properties
MS-P-099 Interfacial modification on recycled polyolefin blend embedded with rice husk powder
MS-P-100 The effect of styrene monomer in graft copolymerization of polystyrene onto natural rubber
MS-P-101 Interactions of a water-soluble polymer, poly(vinylpyrrolidone), and a swelling clay mineral, synthetic saponite
MS-P-102 Development of starch-based thin films for biomedical applications
MS-P-103 Development and characterization of bacterial cellulose/natural rubber composite films
MS-P-104 Thermal stability of zinc oxide - polystyrene composite thin film
MS-P-105 Porosity enhancement of biochar derived from rubber sawdust using steam injection at low temperature
MS-P-106 Modification of PVAc for mechanical properties enhancement of biodegradable plastics
MS-P-107 Effect of fiber content and alkali treatment on the properties of bagase fiber-reinforced epoxy composites
MS-P-108 Viscoelastic and tensile properties of molasses particulate filler filled natural rubber composites: Effect of filler loading
MS-P-109 Improve compatibility of poly(lactic acid) and natural rubber by admicelled poly(methyl methacrylate)
MS-P-110 Possibility of using waste tire rubber powders as flame retardant in high-density polyethylene composites
MS-P-111 Antimicrobial chitosan wound dressing film reinforced with cotton gauze fabric
MS-P-112 Photoactalytic degradation activity of polyvinyl chloride (PVC)-poly(ethylene oxide)-TiO2 composite films
MS-P-113 Top layer coating of latex cup to improve antiadhesive property of rubber latex
MS-P-114 Novel potentiometric urea biosensor based on ureasecovalently immobilized polypyrrole/polyethylenimne hybrid film
MS-P-115 Controlled release osteopontin of hydrophilic oly(D,L-lactic-co-glycolic acid) microparticles by layer-by-layer emulsion technique in dental application
MS-P-116 Structural study of poly(lactic acid) film with microcrystalline cellulose and epoxidized soybean Oil by synchrotron X-ray scattering
MS-P-117 Properties of rice husk ash silica filled prevulcanized deproteinized natural rubber latex film
MS-P-118 Biodegradation of natural rubber reinforced with cellulose nanocrystals from corn cob
MS-P-119 The effect of cellulose surface modifications in toughening epoxy resin
MS-P-120 Synthesis of PAA-PAMPS-PNaSS terpolymers as ultraviolet -tagged scale inhibitor for industrial water cooling system
MS-P-121 Synthesis of poly(methylmethacrylate-co-2-vinylpyridine) via atom transfer radical polymerization as proton exchange membrane
MS-P-122 Fabrication and mechanical properties of green composites between water hyacinth fiber and paper mulberry
MS-P-123 Preparation and characterization of chitosan-gelatin films with Na2SO4 cross-linked for controlled-release of nitrofurantoin
MS-P-124 Bilayer dressing of bacteria cellulose and polylactic acid (PLA) electrospun fibers containing rice extract and essential oil for biomedical applications
MS-P-125 Effects of polyethylene types on properties of polypropylene/polyethylene blends
MS-P-126 Preparation of polyester powder coatings containing polyaniline for anticorrosion protection of steel
MS-P-127 Poly(2-methoxyaniline-5-sulfonic acid) water soluble and self-doped conducting polymer as corrosion inhibitor for mild steel in HCl medium
MS-P-128 Physical and mechanical properties of composite edible films from sago starch and bulk chitosan
MS-P-129 Influence of melt spinning conditions on the poly(lactic acid) fiber properties
MS-P-130 Si-doped boron nitride fullerene as a novel metal-free catalyst for acetylene hydrochlorination investigated by DFT calculation
MS-P-131 Green synthesis of water-soluble quantum dots for bio-medical imaging
MS-P-132 The preliminary investigation of eggshell-derived hydroxyapatite for bone tissue engineering
MS-P-133 Ethanol oxidation reaction of nickel particles on mesoporous carbon
MS-P-134 Gelatin film cross-linked with cinnamaldehyde for wound dressing application
MS-P-135 Feasibility study to produce soft foam product from used peritoneal dialysis solution containers
MS-P-136 Excited state intramolecular proton transfer in ?-Eexpanded systems of 10-Hydroxybenzo[h]quinoline
MS-P-137 Natural thin film doped with oxyresveratrol for antiaging and whitening agent of transdermal patch
MS-P-138 Synthesis and characterization of supermagnetic composite for laccase immobilization by covalent binding
MS-P-139 Monoolein production from esterification of glycerol with oleic acid using tungstophosphoric acid supported on functionalized SBA-15
MS-P-140 Studies on the deterioration of ancient Thai manuscripts
MS-P-141 Studies on the deterioration of the Cordon of the Most Illustrious Order of Chulachomklao
MS-P-142 Preparation of layered double hydroxide film as an anionic adsorbent
MS-P-143 Defining structure on phase transformation of copper phosphide for guaiacol hydrodeoxygenation application
MS-P-144 Effect of coating time on deposition of MoO3 film on anodized aluminum plate prepared by electrochemical plating technique
MS-P-145 Conformational analysis of graphitic carbon nitride (g-C3N4): A density functional theory
MS-P-146 Colorimetric sensor film based on soy protein isolate doped with rhodamine-derivative dye for the detection of copper ions in aqueous solution
MS-P-147 Multifunctional substrate for transparent and flexible organic light emitting diodes (TFOLEDs)
MS-P-148 Synthesis of Cu2ZnSnS4 thin films as light absorber layer for thin film solar cells prepared by solutionbased processes
MS-P-149 Influence of morphologies of SBA15 on the adsorption rate of cytochrome c
MS-P-150 Characterization of donepezil.HCl and donepezil free base cogrinding with salicylic acid and p-aminobenzoic acid
MS-P-151 Effect of tetramethylammonium hydroxide on surface properties and CO2 adsorption of zeolite NaA
MS-P-152 Physico-chemical and in vitro cytotoxic properties of alginate/soy protein isolated scaffolds for tissue engineering applications
MS-P-153 Effect of temperature and times by hydrothermal carbonization process from sawdust and bagasse for carbon materials supporter
MS-P-154 Fabrication of injectable material for carrying protein loaded microsphere using in dental application
MS-P-155 Electrochemical analysis of silver ion using carbon paste electrode and PCB gold electrode modified with Schiff base films
MS-P-156 Surface modification of wood by 3-aminopropyl triethoxy silane and quaternary ammonium cation
MS-P-157 Influence of the annealing temperature on the organometallic halide perovskite phase formation in open air
MS-P-158 Temperature effect on lacquer delamination of food can by electrochemical methods
MS-P-159 The effects of ion implantation on crystal structure, optical and mechanical properties of natural spinel gemstone
MS-P-160 Synthesis of quaternized kappa-carrageenan for transdermal delivery
MS-P-161 Development of latent fingerprints with ebony powder
MS-P-162 The correlation of fatty acid methyl ester content from palm oil transesterification with kinematic viscosity
MS-P-163 Preparation of sodium dodecyl sulphatefunctionalized activated carbon from Gnetum gnemon peel for dye adsorption
MS-P-164 Theoretical and experimental study on effective thermal conductivity of composite thermoelectric foams
MS-P-165 A chemically stable TiO2 layer formation on NiTi alloy by electrochemical process
MS-P-166 Property Modifications of Polylactide/Polyvinylpyrrolidone Blends Loaded with TiO2 by Dielectric Barrier Discharge (DBD) Plasma Treatment
MS-P-167 Hydrothermal synthesis of Zeolite T from kaolin using two different structure directing agents
MS-P-168 Mesostructured strontium titanate synthesized via neutral-template self-assembly route
MS-P-169 Silver nanoparticles-based SERS active paper substrates
MS-P-170 Facile synthesis of carbon quantum dots by plasma - liquid interaction metho
MS-P-171 Nanolycopene production from Momordica cochinchinensis (Gac) fruit
MS-P-172 Synthesis of ZnO nanowire by using rapid mixing hydrothermal method and its potential applications
MS-P-173 Synergistic effect of multi-walled carbon nanotube (MWCNT) and chlorinated paraffin/antimony trioxide in improving the flame retardancy of epoxy nanocomposite
Natural Products, Chemical Biology and Medicinal Applications (NP)
NP-P-001 Formulation of skin care cream from avocado oil and adlay seed extract
NP-P-002 Floral scent from Hedychium coronarium flowers: Characterization of absolute and perfumery applications
NP-P-003 Comparative study on sericin extraction from Thai cocoon residue
NP-P-004 Development of 6-aryl-5-flexible substituted-2,4-diaminopyrimidine as antifolate anti-malarial compounds
NP-P-005 Improvement of purity of policosanol extracted from beeswax
NP-P-006 Structural analysis and MeOOC-Phe-Asn-Leu-NHFmoc tripeptide binding properties of betulinic acid and its derivative
NP-P-007 Chemical constituents and antioxidant activities of essential oils from root and rhizome of Curcuma alismatifolia Gagnap. from Thailand
NP-P-008 Fabrication and evaluation of anti-fungal lozenges derived from modified coconut oil
NP-P-009 Insecticidal activity of the fruits of Piper retrofractum against Spodoptera exigua
NP-P-010 Naphtho-?-pyrone derivatives from the soil-derived fungus Aspergillus tubingensis PP2.2
NP-P-011 Alliacane sesquiterpenoids from submerged cultures of the basidiomycete Inonotus sp. BCC 22670
NP-P-012 Prenylated flavonoids from the stem bark of Artocarpus rigidus
NP-P-013 Inhibition growth of oral carcinoma cell line (KB cells) by hog plum (Spondias pinnata (L. f.) Kurz) fruit extracts
NP-P-014 Preparation of hybrid material from tapioca starch and chitosan
NP-P-015 The isolation and structure elucidation of bioactive compounds from the edible mushroom Astraeus sirindhorniae
NP-P-016 Influence of pH on solution and solid state properties of citrus pectin
NP-P-017 The kaempferol glycoside analog enhanced the antiproliferation effect of Type I IFN by promoting the activation of JAK/STAT signaling through the inhibition of SOCS3
NP-P-018 Flavonol analogues from the flowers of Tagetes erecta L.: Promoting activity on estrogen biosynthesis by aromatase
NP-P-019 The chemistry of reduced graphene oxide for biosensing applications
NP-P-020 Polyoxygenated flavones from Miliusa thorelii Finet & Gagnep leaves
NP-P-021 Phenyl acrylate ester derivatives and their therapeutics potentials as anti-bacterial agents
NP-P-022 Anti-proliferative property of Streptocaulon baumii extract and its isolated compounds
NP-P-023 Fluorescence analysis of glycated proteins
NP-P-024 Phytochemical constituents from the wood of Excoecaria agallocha L. and microbial transformation of ribenone by Aspergillus nig
NP-P-025 Extraction of curcumin and phenolic compounds from turmeric using ?-cyclodextrin for antimicrobial activity against S. mutans
NP-P-026 Antioxidant xanthones from the stem bark of Garcinia dulcis
NP-P-027 a-Glucosidase inhibitors from Pseuderanthemum palatiferum (Nees) Radlk. ex Lindau leaves
NP-P-028 Improvement of microbial quality and antioxidant activity of Centella asiatica (L.) Urban (Bai-Bua-Bok) by electron beam irradiation
NP-P-029 Xanthone derivatives from sal3, an unidentified endophytic fungus, isolated from Salvinia cucullata Roxb.&Bory and their antioxidant activities
NP-P-030 Chemical constituents, phenolic content and antioxidant activity of extracts from the flowers of Cananga odorata var. fruticosa
NP-P-031 A comparative study on the antioxidant activity of leaf and twig from Murraya siamensis
NP-P-032 Antioxidant evaluation of edible parts from Archidendron jiringa
NP-P-033 Quantitative phytochemical analysis and antioxidant activity from leaves and twigs of Xylocarpus granatum
NP-P-034 Synthesis of fused-dihydrooxepinocoumarins with in vitro cytotoxic activity
NP-P-035 Fabrication and characterization of polymeric and lipid based nanocarrier for mosquito repellent patch
NP-P-036 Antioxidant activity of anthocyanin extracts from six varieties of local colour rice in Loei province
NP-P-037 Pyranocoumarins from the root barks of Citrus medica
NP-P-038 Synthesis of helper lipids to enhance DNA delivery of cationic liposome
NP-P-039 Novel benzimidazole derivatives as antiphytopathogenic fungal agent
NP-P-040 Synthesis of cationic lipids with three hydrophobic tails
NP-P-041 Ecofriendly dyeing and antimicrobial finishing on hemp fabric by neem extracts
NP-P-042 Antioxidant activity, total polyphenol and flavonoid contents of ethanolic extract of young galanga (Alpinia galangal (L.) Willd.)
NP-P-043 Antioxidant activity of leaves and twig from Maerua siamensis
NP-P-044 Investigation of total phenolic content and antioxidant property of local Thai vegetables for Khanomjeen
NP-P-045 Investigation of microbial contamination and biochemical properties of ginger ( Zingiber officinale Roscoe) after radiation processing
NP-P-046 Nitric oxide inhibitory activities of flavonoids, xanthones and benzophenone from Maclura cochinchinensis in lipopolysaccharide-activated RAW264.7 macrophages
NP-P-047 Volatile components of Homalomena sp. Rhizome extract and its anti-oxidant activity
NP-P-048 Extraction of bioactive compounds from Red Jasmine Rice and its cosmetic application
NP-P-049 GC-MS analysis of hexane extract of Ngonnak rhizome and its effect on human prostate cancer cell line
NP-P-050 Improving heterologous expression of Streptomyces cytochrome P450 in Escherichia coli
NP-P-051 Synthesis of novel triazolyl acanthoic ester derivatives
NP-P-052 Alpha-glucosidase inhibition of Northern Thai indigenous vegetables
NP-P-053 Chemical constituents of Millettia leucantha Kurz
NP-P-054 Effect of gamma irradiation on antioxidant property and chemical constituents in Hericium erinaceus
NP-P-055 Expression and purification of 4-hydroxy-2 -ketoheptane-1,7-dioate aldolase from Acinetobacter baumannii
NP-P-056 Effect of germination times on proximate compositions of black sesame sprouts (Sesamum indicum L.)
NP-P-057 Chemical components of Zingiber cassumunar and Eupatorium odoratum L. leaves by GC-MS analysis and their antibacterial activity
NP-P-058 Optimizing measurement for release kinetic study of turmeric nanoformulation via fluorescence method
NP-P-059 Antioxidant and antibacterial activities from the banana blossom of Musa acuminata (AAA Group) 'Gros Michel' crude extract
NP-P-060 Antioxidant and antibacterial activities of Oroxylum indicum crude extracts
NP-P-061 Antimicrobial activities of saponins and sapogenins from tea seed pomace (Camellia oleifera abel)
NP-P-062 Chemical constituents from the fruiting bodies of Schizophyllum commune
NP-P-063 Development of semi-solid hydrogel from poly(vinyl alcohol) for use as transdermal drug delivery system
NP-P-064 Anti-tyrosinase, antioxidant activities and phenolic contents of crude extracts from Riceberry rice
NP-P-065 Chemical constituents from the stems, roots and bulbs of Crinum amabile
NP-P-066 Application of nanotechnology in Eichhornia crassipes extracts
NP-P-067 GC-MS analysis, antioxidant and anti-diabetic activities of the methanol extract of Cuscuta reflexa Roxb. grown on different hosts
NP-P-068 Essential oil composition and in vitro anti-aging potential of Elettariopsis wandokthong rhizome
NP-P-069 Tyrosinase inhibition of lichenic secondary metabolites and their semi-synthetic triazole analogues
NP-P-070 Chemical constituents, antioxidant and antibacterial activities of Phellinus linteus extract
NP-P-071 Antioxidant and antibacterial activities of Momordica charantia Linn and Moringa oleifera extracts
NP-P-072 Antibacterial effect of trans-cinnamic acid against bacterial pathogens
NP-P-073 Enhanced properties of squalene/coconut oil based nanoemulsion
Organic Chemistry and Green Chemistry (OR)
OR-P-001 N-Bromosuccinimide catalyzed synthesis of triazatruxene
OR-P-002 Ligand-free CuI-catalyzed cross coupling of aryl iodides with N-heterocycles
OR-P-003 An efficient method for bromination of alcohols and its application for the preparation of 2-thiosubstituted benzothiazoles
OR-P-004 Synthesis and investigation of photophysical properties of porphyrin-embedded polythiophene
OR-P-005 Synthesis of functionalized cyclopentenones via chiral anthracenes
OR-P-006 Synthesis of novel enantiomeric hindered acidanthracene adducts for the absolute configuration assignment of chiral secondary alcohols by 1H NMR
OR-P-007 Synthesis, optoelectrical properties and yheoretical calculations of triphenylamine-boron dipyrromethenetriphenylamine triads for dye-sensitized solar cells applications
OR-P-008 Acetylcholinesterase inhibition of fluorinated vanillin derivatives
OR-P-009 Renewable organocatalysts for the conversion of carbon dioxide to cyclic carbonate under ambient conditions
OR-P-010 Biological activity of isostere vanillin deriva
OR-P-011 Synthesis and biological evaluation of a series of isomeric iheyamine a derivatives
OR-P-012 Synthesis of methoxy-oxacilin derivatives with different regiochemistry
OR-P-013 Acetic acid as a catalyst for the acylation of amines using esters as the acyl Source
OR-P-014 The investigation of multivalent effects to enhance inhibitory activity of cystic fibrosis trans-membrane conductance regulator (CFTR) inhibitor
OR-P-015 The Ullmann-typed copper-catalyzed N-arylation in an ionic liquid medium
OR-P-016 Synthesis and cytotoxicity of sulfate esters of lithocholic acid
OR-P-017 Novel of quinoline derivatives containing 5-membered heterocycles for Zinc ions detection
OR-P-018 Structural modification of ecdysteroid to brassinosteroid analogues for plant growth regulating activity evaluation
OR-P-019 Structural modification of derrisisoflavone A, the major isoflavone from Deris scandens, and evaluation of nitric oxide inhibition
OR-P-020 Directed functionalization strategy in the synthesis of quinolizidine alkaloids
OR-P-021 Diastereoselective michael addition of 2-nitrogalactal by using sodium diethyldithiocarbamate as an activator
OR-P-022 Chiral auxiliary derived from L-(+)-aspartic acid for asymmetric alkylation
OR-P-023 A Synthetic study of tabartinggine
OR-P-024 Divergent synthetic route for slaframine and epiquinamide
OR-P-025 Synthetic study of hirsutine
OR-P-026 A New cembrane-type diterpenoid and a new flavonoid from aerial part of Cleome viscosa
OR-P-027 A new truxene derivative as highly selective turn-on fluorescent sensor for hydrogen phosphate
OR-P-028 Synthetic study of lycorine
OR-P-029 Alkaloids from the stems and twigs of Dasymaschalon dasymaschalum
OR-P-030 Quinoline syntheses via copper-catalyzed domino reaction of 2-halogenated benzaldehydes and enaminones
OR-P-031 Cross metathesis of methyl oleate: An alternative route for converting renewable natural resources into valuable chemical products in oleochemical industry
OR-P-032 Biodiesel production using calcium oxide on activated charcoal as heterogeneous catalyst
OR-P-033 A two-photon fluorescent probe for molecular 3D imaging of a? aggregates in vivo
OR-P-034 Synthesis of photoresponsive coumarin derivatives for controlled-release plant growth regulators
OR-P-035 Design and synthesis of photoresponsive coumarin for plant hormone
OR-P-036 Fluoride-catalyzed nucleophilic addition of ?,?-difluoro-?-phenylsulfanyl-?-trimethylsilylmethane (PhSCF2SiMe3) to indoline-2,3-dione derivatives
OR-P-037 Study towards asymmetric synthesis of 2,5-bis-aryl-3,4-dimethyl tetrahydrofurans: synthesis of entfragransin C1
OR-P-038 Synthesis of gem-difluoro(phenylsulfanyl)methyl ketone from Weinreb amide
OR-P-039 Modeling, design and synthesis of novel fluorescence sensor for the detection of Cd2+
OR-P-040 Optimizing microwave assisted bamboo charcoal for the adsorption of heavy metals and dye
OR-P-041 Two-photon fluorescent bio-conjugate for quantitative imaging of acidic pH in endocytosis
OR-P-042 Mechanistic study of carbocation cyclization to form indanols and indenes
Physical Chemistry (PH)
PH-P-001 Electronic and photophysical properties of derivatives of 3-hydroxyflavones
PH-P-002 Synthesis, characterization, molecular docking, biological activity, and DFT studies of a new benzoxazole ligand
PH-P-003 Molecular modeling of the chiral recognition of linalool enantiomers by beta-cyclodextrin
PH-P-004 Lewis acid sites of Sn-BEA zeolites catalyze the furfural hydrogenation: A DFT study
PH-P-005 Theoretical study on pyrophosphoryl transfer catalyzed by 6-hydroxymethyl-7,8-dihydropterin pyrophosphokinase (HPPK): A key enzyme in folate pathway
PH-P-006 Molecular engineering on meso-functionalized pushpull porphyrin based sensitizers : Effect of donor/acceptor on the light-harvesting ability
PH-P-007 High-conversion-efficiency dye-sensitized solar cell: molecular engineering on D-A featured organic indole dyes
PH-P-008 Theoretical studies focused on the prediction of the skin sensitization potential of Schiff bases
PH-P-009 Theoretical study on the phosphorescence quantum yields of Ir(III) complexes with N-heterocyclic carbene ligands
PH-P-010 The roles of auxiliary electron donors and acceptors on triphenylamine dyes for dye-sensitized solar cells: A density functional study
PH-P-011 Binding energy and specificity of three Bowman-Birk inhibitors with trypsin in ternary complexes
PH-P-012 A DFT study of a lead(II) adsorption on different porous carbon sheets
PH-P-013 The binding of levan oligosaccharides with the chain length of three and four residues in the active site of Bacillus licheniformis RN-01 levansucrase
PH-P-014 A DFT Study on molecular interactions of MPTP and tyrosine
PH-P-015 Conformers and intramolecular interactions of 6-OHDA in the gas phase
PH-P-016 Molecular dynamics of interactions between disaccharides and the wild-type and Y227H mutant of ?-glucosidase III from European honeybee, Apis mellifera
PH-P-017 Formation kinetic study of LiNiPO4 by solid state reaction method
PH-P-018 Curcuminoid derivatives as potent anti-inflammatory target prostaglandin H2 synthase: Molecular docking study
PH-P-019 Ab initio study of the adsorption of small molecules on the modified surface of carbon nanotubes
PH-P-020 2D-QSAR of b-amino amide based dipeptidyl peptidase-4 inhibitors
PH-P-021 Binding mode study of estradiol in complex with estrogen receptor beta by computational methods
PH-P-022 Investigating the aromaticity and electronic structure of some poly-2,7?,1?,6?-[3]calicenes with reversed push-pull effect
PH-P-023 Fabrication of NiO nanowires by modified sol-gel method
PH-P-024 Preparation and characterization of ZnO nanowires by thermal decomposition method
PH-P-025 The adsorptions of glucose, hydroxymethylfurfural and levulinic acid on H-ZSM-5: An ONIOM scheme
PH-P-026 Theoretical studies of metal deposited graphene for removal of airborne pollutants
PH-P-027 Synthesis and characterization of p-NiO-core /n-ZnOshell nanorod by a single- step carbon-assisted thermal evaporation method
PH-P-028 A theoretical investigation on electronic transition of PhOLEDs relevant tetradentate Pt(II) complexes with ?-donor and ?-acceptor carrier ligands
PH-P-029 Theoretical study of oxidative half-reaction mechanism of p-hydroxyphenylacetate 3-hydroxylase (HPAH)
PH-P-030 Molecular docking studies of new design inhibitors of tyrosinase
PH-P-031 Synthesis and non-isothermal kinetics studies of LiMnPO4
PH-P-032 High selective H2S gas sensing of p-CuxO/n-ZnO nanoparticles synthesis by FSP
PH-P-033 Phase behavior of solid-liquid lipid mixtures studied by coarse-grained simulations
PH-P-034 Quantum chemical calculations to predict the LLNA skin sensitization potential for the acyl chemical domain
PH-P-035 A DFT study on the structure-antioxidant capacity of anthocyanins: A novel inhibition to the human ACE
PH-P-036 Metalloenzyme-ligand docking guided by semiempirical quantum mechanical potentials
Polymer Chemistry (PO)
PO-P-001 Preparation and properties of oxidized starch using hydrogen peroxide as oxidizing agent
PO-P-002 Preparation and properties of cassava starch grafted by methacrylamide (MAA)
PO-P-003 Properties of cassava starch film cross-linked by tartaric acid
PO-P-004 Preparation and characterization of poly(vinyl alcohol)/starch biodegradable film modified with silica nanoparticle
PO-P-005 Preparation of biodegradable food packaging film from cassava thermoplastic starch and poly(lactic acid) blend using homemade poly(vinyl acetate-co-vinyl alcohol) as a compatibilizer
PO-P-006 Preparations and properties of cocoyam flour and crosslinked poly(vinyl alcohol)/cocoyam flour blend films by boric acid
PO-P-007 In-situ fibrillation of LLDPE in PLA/LLDPE blend films : Effect on mechanical properties and thermal properties
PO-P-008 Effects of halogen-free flame retardant additives on the flame retardancy, thermal insulation and mechanical properties of rigid polyurethane foams
PO-P-009 Properties of biodegradable plate from spent coffee grounds by compression molding
PO-P-010 Preparation and properties of poly(vinyl alcohol) / banana flour sheet
PO-P-011 The effect of the crosslinking agent on physical and mechanical properties of banana flour sheet
PO-P-012 Influence of peroxide initiator on biodegradable blends between polybutylene succinate and poly(butylene adipate-co-terephthalate)
PO-P-013 Modification of bio-polybutylene succinate flexible films by poly(butylene adipate-co-terephthalate)
PO-P-014 Thermal and mechanical properties of poly(lactic acid) film with various additives
PO-P-015 Development of modified cellulose based polypropylene and ethylene vinyl acetate composite for chilled food packaging
PO-P-016 Encapsulated Neem Seed oil extract containing Azadirachta indica in biodegradable polymer for release characteristics and insect repellence
PO-P-017 Production and properties of bacterial cellulose using coconut water and an inferior honey
PO-P-018 Effect of coconut residue fiber to biodegradable composite foam based on cassava starch
PO-P-019 Hierarchical reinforcement of as extract Neem seed oil in to polypropylene and poly(lactic acid) binary blend composite for mulching film applications
PO-P-020 Biopolymer composite from carboxylated styrene butadiene rubber latex and cassava starch: preparation and properties
PO-P-021 Preparation of thermoplastic elastomer from natural rubber and polycaprolactone blend
PO-P-022 Preparation of thermoplastic elastomer from natural rubber and poly(butylene adipate-co-terephthalate) blends
PO-P-023 Improvement of the adhesion between natural rubber film and carboxylated nitrile rubber film (XNBR) interface by blending XNBR with polychloroprene
PO-P-024 Effect of bagasse fiber on sound absorption coefficient of rubber foam
PO-P-025 Effect of Cloisite15A and Cloisite30B on different ratio of NR/ENR/EVA foam
PO-P-026 Preparation and properties of graphite oxidechloroacetated natural rubber composites
PO-P-027 Construction of the three-phase hybrid of reHDPE/wood flour/ground tire rubber composites to improve mechanical properties
PO-P-028 Utilization of rice bran oil fatty acid distillate as processing aid in carbon black filled acrylonitrile butadiene rubber compound
PO-P-029 Effect of hydroxyl telechelic natural rubber molecular weight and chain extender content on properties of waterborne polyurethane from natural rubber and poly(ethylene glycol)
PO-P-030 Effects of nano-titanium dioxide (nano-TiO2) on natural rubber properties
PO-P-031 Reinforcement of hydrogenated nitrile rubber by untreated cotton fibre: effects of cotton fibre alignment and state-of-mix
PO-P-032 Improvement of recovery method of small rubber particles from skim natural rubber latex
PO-P-033 Effect of acid coagulation and antioxidants on storage hardening phenomenon of natural rubber
PO-P-034 Novel drying process for natural rubber using FIR from Macca carbon
PO-P-035 Effect of K-oleate on natural rubber latex porous film
PO-P-036 A model study on effect of proteins and lipids from natural rubber on adhesion between isoprene rubber and metal
PO-P-037 Fertilizer-loaded cellulose hydrogels derived from pineapple leaves
PO-P-038 Use of salt solution as porogen on the cellulose hydrogel from oil palm shoot
PO-P-039 Poly(2-hydroxyethyl methacrylate)/silk sericin hydrogel scaffold for dermal reconstruction
PO-P-040 Synthesis and characterization of the biodegradable hydrogel of starch-g-polyacrylamide/poly(vinyl alcohol) for dye removal applications
PO-P-041 Hydrogel of sodium carboxymethyl cellulose/polyacrylamide interpenetrating polymer networks for controlled delivery: preparation and characterization
PO-P-042 Preparation and properties of hydrogel from cellulose and acrylamide by gamma irradiation
PO-P-043 Curcumin-loaded alginate/chitosan bilayer wound dressing
PO-P-044 Fabrication of electrospun nanofibers made from poly(vinyl alcohol)/natural silk protein sericin
PO-P-045 Curcumin film for aqueous based application
PO-P-046 Encapsulation of curcumin by styrene-maleic anhydride copolymer using microsuspension iodine transfer polymerization
PO-P-047 Preparation of aptamer-coated beads for protein capturing via amide bond coupling
PO-P-048 Four- and five-coordinate aluminum complexes and their application in the ring-opening polymerization of rac-lactide
PO-P-049 Bacterial cellulose nanocrystals based surface-doped fluorescence for hydrogen sulfide sensor
PO-P-050 Synthesis, characterization and influence of sodium humate on the physical properties of PVA/(CSt-g-PAM) hydrogel film
PO-P-051 Magnetic nanoparticle coated with multi-responsive copolymer containing thiolactone acrylamide
PO-P-052 Synthesis of polyolefin-polystyrene block copolymers through sequential coordination and anionic polymerizations
PO-P-053 Preparation and characterization of poly(lactic acid)/poly(?-caprolactone)-polyhedral oligomeric silsesquioxane thin films
PO-P-054 Thermal Stability of poly(2-methoxyaniline-5-sulfonic acid)
PO-P-055 Effect of poly(methyl methacrylate-co-methacrylic acid) on the properties of poly(vinylidenefluoride)-based ultrafiltration membrane
PO-P-056 Water-reducible binder based on acrylic-urethane alkyd resin
PO-P-057 Structure property relationship of novel thermoplastic polyurethane concentrated on the effect of hard segment content
PO-P-058 A combined experimental and density functional theory study on structural and photophysical properties of polyaniline nanoparticles (PANi(np))
PO-P-059 Phase separation dynamic and morphologies prediction of PEO-b-PMMA block copolymer by atomistic and mesoscopic simulations
PO-P-060 Molecular association of tamarind seed xyloglucan in aqueous solution
Sustainable Catalysis and Petrochemicals (CP)
CP-P-001 Effect of SrO and ZrO2 doped Al2O3 supports toward the catalytic activities of Ni-based catalysts
CP-P-002 Synthesis and catalytic performance of bimetallic NiW- and NiMo-ZSM-5/MCM-41 composites for production of biofuels
CP-P-003 The catalytic conversion of ethanol to gasoline with high performance
CP-P-004 Preparation of Ru-Co catalysts over mixed supports for Fischer-Tropsch synthesis
CP-P-005 Synthesis of bromosilane catalyzed by palladium chloride impregnated on aluminium oxide-pillared clay
CP-P-006 Iron oxide-pillared clay catalyzed the synthesis of bromosilane
CP-P-007 Efficient oxidation of benzyl alcohol mediated by palladium chloride impregnated on aluminium oxidepillared clay
CP-P-008 Iron oxide-pillared clay catalyst for oxidation of benzyl alcohol
CP-P-009 Modified wacker oxidation of ethylene to acetaldehyde on cellulose-aluminum oxide composite
CP-P-010 Effects of platinum loading on YSZ and preparation method on non-faradaic electrochemical modification of catalytic activity (NEMCA) on propane oxidation
CP-P-011 Development MPr-SO3H-KIT-6 catalyst for furfural production
CP-P-012 Catalytic dehydrogenation of propane to propylene over Gallium loaded HZSM-5
CP-P-013 Oxidative dehydrogenation of propane over potassium hexatitanate-based catalysts
CP-P-014 The effect of potassium addition on acidity of Yzeolite catalysts
CP-P-015 Effect of CoMoP catalysts on hydrodeoxygenation of Guaiacol as bio oil model compound
CP-P-016 Deoxygenation of heptanoic acid over alloyed-Pt catalysts: Model of terminal olefins production from fatty acids
CP-P-017 Deoxygenation of heptanoic acid over cobalt supported silica catalysts
CP-P-018 Heterolytic C-H activation of propane using chromium single-site heterogeneous catalyst
Renewable Energy (RE)
RE-P-001 Development of pelletization of magnetite solid sorbent for H2S capture
RE-P-002 Pelletization of amine-functionalized sorbents for carbon dioxide capture
RE-P-003 Development of bacterial cellulose and polyaniline composite as dielectric gate material
RE-P-004 Alkali pretreatment and enzyme hydrolysis to enhance the digestibility of rice straw cellulose for microbial oil production
RE-P-005 Electrochemical promotion of catalytic activity for hydrogen production from autothermal ethanol steam reforming
RE-P-006 Non-faradaic electrochemical modification of catalytic activity of propane oxidation at thin-film cell on alumina
RE-P-007 Methanol oxidation reaction of Pt catalyst on polyaniline support at elevated temperatures
RE-P-008 Experimental study on the performance of direct methanol fuel cell using novel composite materials of polypyrrole-coated polypropylene as bipolar plates
RE-P-009 Bioethanol production from ball-milled and regenerated rice husk
RE-P-010 Heterogeneous catalyst doped strontium and catalyst pellet for biodiesel production
RE-P-011 Feasibility study of methane production from tire industrial wastewater treatment plant
RE-P-012 Effect of donor substitution and ?-conjugated spacer to dye sensitized solar cell properties
RE-P-013 Esterification of high acid value oil by carbon-based solid catalysts
RE-P-014 Fabrication of Platinum/Carbon Nanotubes Spraycoated on Carbon Cloth for Microbial Fuel Cell
RE-P-015 Co-pyrolysis of glycerol and palm empty fruit bunch: A preliminary study via PY-GC/MS
RE-P-016 The study of Li, K and Cs-zeolite 4A and 13X on etherification of glycerol to polyglycerols via microwave heating method
RE-P-017 Upgrading of pyrolysis Eucalyptus bio-oil over Ni/Al2O3 catalyst
RE-P-018 Piezoelectric nanogenerators based on metal nanoparticles-polyvinylidene fluoride nanocomposites
RE-P-019 Effect of catalyst supports on hydrodeoxygenation and hydrodenitrogenation of jatropha bio-oil derived fast pyrolysis
RE-P-020 Effects of water on hydrodeoxygenation reaction of bio-oil model compound over CoMo sulfide catalysts
RE-P-021 Renewable fuels from catalytic upgrading of Jatropha bio-oil by hydrodeoxygenation
RE-P-022 Characterization of glycerol-mannitol-silica-graphite PCM thermal storage unit for small scale solar dryer applications
RE-P-023 Sustainable and low cost biodiesel production using modified-paddy field snail shell (Pila ampullacea) catalyst
RE-P-024 Preparation of ZrO2-SiO2 bamboo leaves ash composit as catalyst of sustainable biodiesel Conversion of oil rice bran
RE-P-025 Water splitting for hydrogen production on mixed metal nanoparticles
RE-P-026 Development of a real-time LabVIEW DAQ solar panel monitoring system using low-cost power, temperature and sunlight irradiation sensors
RE-P-027 Synthesis and characterization of heterogeneous catalyst to produce biodiesel from crude palm oil
626 records found


Account
Account / E-mail:
Password:
 
Sign up    Forgot password
 
  IMPORTANT DATE :
SUBMISSION DATES :
Abstract submission opens :
July 13, 2016
Abstract submission deadline :
November 15, 2016 (Updated)
Notification of abstract acceptance :
December 4, 2016 (Updated)
Full paper-Proceeding submission deadline :
January 31, 2017 (Updated)
Notification of proceeding acceptance :
March 31, 2017 (Updated)
REGISTRATION DATES :
Registration and payment for presenters :
December 18, 2016 (Updated)
Early registration deadline :
July 13 - December 26, 2016
Late registration :
After December 26, 2016
On-site registration :
February 2, 2017
  Follow us on Facebook

List of Sponsors
Diamond Level

Platinum Level
PACCON © 2017 Privacy Policy